ESUN STANDARD RESIN
eSun 3D Printer Standard Resin 1Kg-White Specifically intended for LCD/LED light source to accomplish preferable printing quality and better over stock gums of Anycubic and Wanhao D7. It is General Purpose Resin, Compatible to most LCD printers and DLP with LED UV having Faster Printing Speed and Low Odor and No Toxic.
1) Keep away from light and fixed at room temperature.
2) It is prescribed to store the gum between 15 Celsius and 35 Celsius in its unique compartment.
Evade any dusty or sodden climate.
1) Shake a long time before use. Dodge any immediate daylight during utilization.
2) Keep it away from the kids. Try not to place in mouth.
3) Wear gloves before use to evade direct contact with the skin and keep the room ventilated.
4) If inadvertently reached, kindly wash with a lot of water right away. Look for clinical guidance if important.
5) Finished models are needed to clean by high-fixation liquor (>95%) around 30 seconds.
- Wavelength(nm): 395-405
- Density(g/m^3): 1.08-1.13
- Hardness(Shore D):80-82
- Tensile Strength(MPa): 46-67
- Elongation at Break(%):28-35